pangborn spare parts

⊞ Grid view ⊟ List view

Filter

Showing all 21 results

Sort by latest

Availability

In stock
Out of stock

Quick view

Hood Side Wear Tile – Drive Side R/H: XSES26FD

The Hood Side Wear Tile - Drive Side is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The Hood Side Wear Tile of Pangborn SES Wheel Unit - (This part is for the right

Quick view

Hood End Wear Tile: XSES22F-C

The Hood End Wear Tile is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The Hood Side Wear Tile of Pangborn SES Wheel Unit

Quick view

M12 Tile Bolt c/w Nut & Washer Bolt0233ST

M12 Tile Bolt c/w Nut & Washers - Metric 12mm tile bolt. Supplied and available from Pangborn UK.

Quick view

Feed Chute Seal: XSES9

Feed Chute Seal is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The Pangborn SES Feed Chute to Feed Wheel

Quick view

Reversible Super Wheel: XSESR1T-L

Reversible Super Wheel is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is for the Pangborn SES Wheel Assembly

Quick view

T/L Bush to Suit SESR1T/L Wheel (38, 42 or 48mm) XB2525/38/42/48

The T/L Bush is to Suit SESR1T/L Wheel is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part fits into the Reversible Super Wheel for Pangborn SES Wheel Assembly

Quick view

M16 Dispenser Bolt c/w Washer Bolt0375

M16 Dispenser Bolt c/w Washer –Metric 16mm Dispenser Bolt. Supplied and available from Pangborn UK.

Quick view

M12 Dispenser Bolt c/w Washer Bolt0350

M12 Dispenser Bolt c/w Washer –Metric 12mm Dispenser Bolt. Supplied and available from Pangborn UK.

Quick view

Rubber Hub Seal: XSES8C

Rubber Hub Seal is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: Suitable for; SES R1 Taper Lock Wheel

Quick view

Clamp Ring For SES8CC Seal XSES8CB

Clamp Ring For SES8CC Seal is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: Suitable for; SES8CC Seal

Quick view

M16 Motor Mounting Studs c/w Nut & Washers ENGSTUD16

M16 Motor Mounting Studs c/w Nut & Washers –Metric 16 mm Mounting Studs. Supplied and available from Pangborn UK.

Quick view

M12 Hood Mounting Studs c/w Nut & Washers ENGSTUD12

M12 Hood Mounting Studs c/w Nut & Washers –Metric 12 mm Mounting Studs for motor. Supplied and available from Pangborn UK.

Quick view

Pilot Bored Wheel (bored to suit motor shaft) – XSESR1PB

The Pilot Bored Wheel is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: Suitable for; foot mounted Pangborn SES Wheel Unit

Quick view

R-LOC Inner Case Adaptor – P000890

The R-LOC Inner Case Adaptor is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit

Quick view

Deflector – 6-750027

The Deflector is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The 180 3rk Wheel Unit

Quick view

Vanes – 6-900012

Vanes are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The 180 3rk Wheel Unit

Quick view

Runnerhead Outer – 26-750025

The Runnerhead Outer is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The 180 3rk Wheel Unit

Quick view

Runnerhead Inner – 36-620465

The Runnerhead Inner is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The 180 3rk Wheel Unit

Quick view

Vanes 6-900011

Quick view

Vane Spring – RAP-4

Vane Spring's are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The 180 3rk Wheel Unit

Quick view

‘O’ Ring – S-900658-2

'O' Ring's are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines. NOTE: This part is suitable for; The 180 3rk Wheel Unit

Hood Side Wear Tile – Drive Side R/H: XSES26FD

Hood End Wear Tile: XSES22F-C

M12 Tile Bolt c/w Nut & Washer Bolt0233ST

Feed Chute Seal: XSES9

Reversible Super Wheel: XSESR1T-L

T/L Bush to Suit SESR1T/L Wheel (38, 42 or 48mm) XB2525/38/42/48

M16 Dispenser Bolt c/w Washer Bolt0375

M12 Dispenser Bolt c/w Washer Bolt0350

Rubber Hub Seal: XSES8C

Clamp Ring For SES8CC Seal XSES8CB

M16 Motor Mounting Studs c/w Nut & Washers ENGSTUD16

M12 Hood Mounting Studs c/w Nut & Washers ENGSTUD12

Pilot Bored Wheel (bored to suit motor shaft) – XSESR1PB

R-LOC Inner Case Adaptor – P000890

Deflector – 6-750027

Vanes – 6-900012

Runnerhead Outer – 26-750025

Runnerhead Inner – 36-620465

Vanes 6-900011

Vane Spring – RAP-4

‘O’ Ring – S-900658-2

Products

Services

Information & Support

Contact Us

Product Enquiry

Products

Services

Information & Support

Contact Us

Follow us

Product Enquiry