Showing all 41 results
S-230 0.7mm Abrasive Steel Shot
£40.29
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-280 0.8mm Shot blasting Abrasive Shot
£40.29
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-330 1.0mm Shot blasting Abrasive Shot
£40.29
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-390 1.2mm Shot blasting Abrasive Shot
£40.29
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-460 1.4mm Shot blasting Abrasive Shot
£40.29
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-550 1.7mm Shot blasting Abrasive Shot
£40.29
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-660 2.0mm Shot blasting Abrasive Shot
£40.29
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-780 2.4mm Shot blasting Abrasive Shot
£40.29
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-110 0.4mm Shot blasting Abrasive Shot
£74.64
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-170 0.6mm Shot blasting Abrasive Shot
£74.64
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-170 0.6mm Shot blasting Abrasive Shot
£74.64
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-70 0.3mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-110 0.4mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-170 0.6mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-280 0.8mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-230 0.7mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-330 1.0mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-390 1.2mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-460 1.4mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-550 1.7mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-660 2.0mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
S-780 2.4mm Shot blasting Abrasive Shot
£805.81
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag
G-14 1.7mm Shot blasting Abrasive Grit
£40.29
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-16 1.4mm Shot blasting Abrasive Grit
£40.29
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-18 1.2mm Shot blasting Abrasive Grit
£40.29
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-25 1.0mm Shot blasting Abrasive Grit
£40.29
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-40 0.7mm Shot blasting Abrasive Grit
£40.29
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-50 0.5mm Shot blasting Abrasive Grit
£40.29
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-80 0.3mm Shot blasting Abrasive Grit
£40.29
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-10 2.4mm Shot Blasting Abrasive Grit
£41.54
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-120 0.2mm Shot blasting Abrasive Grit
£40.29
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-10 2.4mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-12 2.0mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-14 1.7mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-16 1.4mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-18 1.2mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-25 1.0mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-40 0.7mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-50 0.5mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-80 0.3mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.
G-120 0.2mm Shot blasting Abrasive Grit
£805.81
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags.