Showing all 41 results
Hood Side Wear Tile – Drive Side R/H: XSES26FD
The Hood Side Wear Tile - Drive Side is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The Hood Side Wear Tile of Pangborn SES Wheel Unit - (This part is for the right
Hood End Wear Tile: XSES22F-C
The Hood End Wear Tile is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The Hood Side Wear Tile of Pangborn SES Wheel Unit
Hood Lid Wear Tile: XSES21F-C
The Hood Lid Wear Tile is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The Hood Side Wear Tile of Pangborn SES Wheel Unit
Feed Chute Seal: XSES9
Feed Chute Seal is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The Pangborn SES Feed Chute to Feed Wheel
T/L Bush to Suit SESR1T/L Wheel (38, 42 or 48mm) XB2525/38/42/48
The T/L Bush is to Suit SESR1T/L Wheel is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part fits into the Reversible Super Wheel for Pangborn SES Wheel Assembly
Rubber Hub Seal: XSES8C
Rubber Hub Seal is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: Suitable for; SES R1 Taper Lock Wheel
Pilot Bored Wheel (bored to suit motor shaft) – XSESR1PB
The Pilot Bored Wheel is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: Suitable for; foot mounted Pangborn SES Wheel Unit
Housing Retention Plate – XSES4A
The Housing Retention Plate, manufactured and supplied by Pangborn UK is specifically designed to suit foot mounted Pangborn SES wheel unit and flange mounted unit.
This is an Pangborn UK OEM Spare Part, only available from Pangborn UK.
Cast Hub Seal Plate – XSES8A
The Cast Hub Seal Plate is manufactured and supplied by Pangborn UK. Designed to suit foot mounted Pangborn SES wheel unit, specifically designed for this type of wheel unit.
This is an Pangborn UK OEM Spare Part, only available from Pangborn UK.
Hub Seal Felt/Rubber (Small Bore) – XSES8C1
Hub Seal Felt/Rubber (Small Bore) is manufactured and supplied by Pangborn UK. Designed to suit foot mounted Pangborn SES wheel unit, specifically designed for this type of wheel unit.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Hood Lid Curved Wear Tile – XMF5
The Hood Lid Curved Wear Tile - Pangborn SES Hood Lid Curved Wear Tile is manufactured and supplied by Pangborn UK. This hood has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Hood End Wear Plate – XMF6
Hood End Wear Plate - Pangborn SES End Wear Plate - is manufactured and supplied by Pangborn UK. This plate has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Upper Hood Side Wear Plate – XMF7
Upper Hood Side Wear Plate - Pangborn SES Upper Hood Side Wear Plate is manufactured and supplied by Pangborn UK. This plate has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Lower Hood Side Wear Plate – XMF9A L/H
The Lower Hood Side Wear Plate - Pangborn SES Lower Hood Side Wear Plate is manufactured and supplied by Pangborn UK. This hood has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
NOTE: This Part is Designed for
Lower Hood Side Wear Plate – XMF9A R/H
The Lower Hood Side Wear Plate – Pangborn SES Lower Hood Side Wear Plate is manufactured and supplied by Pangborn UK. This hood has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
NOTE: This Part is Designed for
Feed Chute – XSES3
The Feed Chute is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
Suitable for; suite flanged, curved and foot mounted Pangborn SES wheel units.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Quad Valve Assembly – XSES4ASS
The Quad Valve Assembly is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
NOTE: This part is suitable for; Pangborn SES Wheel Units.
Feed Cast Hopper – XSES5
The Feed Cast Hopper is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
NOTE: This part is suitable for; Pangborn SES Wheel Units.
Hub Seal Felt / Rubber (Large Bore) – XSES8C2
The Hub Seal Felt / Rubber (Large Bore) is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
R-LOC Top Liner – A1936
R-LOC Top Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Rear Side Liner – A1940-B
R-LOC Rear Side Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC End Liner – A1937
R-LOC End Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Vanes (Set of 8) – 6000025-8
R-LOC Vanes are an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Impellor – 6010000
The R-LOC Impellor is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Vane Spring – M0651
The R-LOC Vane Spring is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Rubber Lid Liner – M2046
The R-LOC Rubber Lid Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-Loc Felt Seal – S040146
The R-Loc Felt Seal is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Taper Lock Bush 42mm – S080114-2
The R-LOC Taper Lock Bush is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Case Adaptor – A0301
The R-LOC Case Adaptor is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Feed Spout – A-0303
The R-LOC Feed Spout is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Spout Seal – C60152
The R-LOC Spout Seal is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC ‘O’ Ring – C60153
The R-LOC 'O' Ring is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Outer Runnerhead – H010109
The R-LOC Outer Runnerhead is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Inner Case Adaptor – P000890
The R-LOC Inner Case Adaptor is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
Deflector – 6-750027
The Deflector is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Vanes – 6-900012
Vanes are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Runnerhead Outer – 26-750025
The Runnerhead Outer is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Runnerhead Inner – 36-620465
The Runnerhead Inner is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Vanes 6-900011
Vanes are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Vane Spring – RAP-4
Vane Spring's are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
‘O’ Ring – S-900658-2
'O' Ring's are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
