Showing all 13 resultsSorted by latest
Silicon Carbide Venturi Nozzles with Acetal Jacket
Featuring a liner made from hot-pressed boron carbide, this abrasive blast nozzle offers chemical and wear resistance properties, making it ideal for abrasives such as garnet, aluminium oxide and steel grit to enter the abrasive blast nozzle.
As well as being heat and corrosion resistant, the nozzle’s aluminium jacket makes it
Tungsten Carbide Venturi Blast Nozzles with Acetal Jacket
Built to be impact resistant and long wearing, the Tungsten Carbide Venturi Blast Nozzle with Acetal Jacket is ideal for use with aggressive abrasives. Supplied with a rubber gasket, the abrasive blast nozzle’s acetal jacket protects the tungsten carbide liner, prolonging it’s lifespan whilst keeping the abrasive blast nozzle lightweight,
Silicon Nitride “Syalon” Syclone Venturi Nozzle
Designed to be hard wearing and long lasting, this abrasive blast nozzle features a silicon nitride liner which reduces the weight of the abrasive blast nozzle by approximately 50%.
Supplied with a rubber gasket, the abrasive blast nozzle offers high temperature resistant properties, making it resistant to corrosion by many acids
Boron Carbide Venturi Nozzle Aluminium & Rubber
Featuring a liner made from hot-pressed boron carbide, this abrasive blast nozzle offers chemical and wear resistance properties, making it ideal for abrasives such as garnet, aluminium oxide and steel grit to enter the nozzle. As well as being heat and corrosion resistant, the nozzle’s aluminium jacket makes it lightweight
Tungsten Carbide Venturi Blast Nozzles
Designed to create a wide blast pattern and greatly increase velocity, the Tungsten Carbide Venturi Blast Nozzle with Aluminium Jacket is ideal for blasting large surfaces. Supplied with a rubber gasket, this general purpose abrasive blast nozzle features a tungsten carbide insert and aluminium jacket providing durability and toughness to
Tungsten Carbide Water Jet System Nozzles
The Tungsten Carbide Venturi Liner Aluminium Jacket & Water Jet System is ideal for use in situations when dust control is needed, this abrasive blast nozzle mixes water with the abrasive, reducing the amount of dust displaced into the atmosphere. Featuring an aluminium jacket which provides strength and endurance, this
45° Angled Liner Blast Nozzles
The abrasive blast (sandblast) nozzle is ideal for getting inside tight or hard to reach places such as behind flanges, around corners or inside pipes. The angled nozzle is compact, shoots out the abrasive at a 45° angle and has an aluminium jacket providing strength and endurance.
NOTE: This valve is fitted
Tungsten Carbide Double Venturi Blast Nozzles – Alu Jacket
This abrasive blast nozzle offers a 35% larger blast pattern than a standard Venturi nozzle with only a small loss in abrasive velocity. Designed to be used on jobs where a more even dispersion of abrasive is required through a larger blast pattern. Supplied with a rubber gasket, it is
GV & AGV elcoTOUGH™ Rubber Valve Liner
The elcoTOUGH™ liners last more than 3 times longer and can be quickly replaced without removing the valve from the machine, rubber liner can be quickly replaced without disconnecting the valve.
Made from tough, abrasion resistant natural rubber, ideal for metering all types of abrasive materials.
MGV elcoTOUGH™ Rubber Valve Liner
The elcoTOUGH™ liners last more than 3 times longer and can be quickly replaced without removing the valve from the machine, rubber liner can be quickly replaced without disconnecting the valve.
Made from tough, abrasion resistant natural rubber, ideal for metering all types of abrasive materials.
Air Supply Ball Valves
Air Supply Ball Valves are fitted between the air hose and the moisture separator to isolate the compressor when undertaking maintenance work - disconnects the compressed air from the blast machine for safe work.
Safety Petcock 1/4” (6mm) HP Ball Valve
Designed with a large, easy to reach handle, the red safety petcock valve fits to the RCV4000 and RCV4000+ remote control valves. In an emergency it will isolate the deadman’s handle circuit and depressurise the blast machine quickly.
1 1/2″ (38mm) Moisture Separator
The highly efficient Moisture Separator prevents moisture and oil from the compressor entering the blast machine. Eliminating up to 98% of the moisture and oil from compressed air, the moisture separator stops the abrasive becoming damp and clogging the blast machine.
