Showing 101–200 of 200 resultsSorted by latest
RPB Astro Blast Helmet Tear Off Lenses (Pack of 50)
Tear off lenses (pack of 50) to fit the RPB Astro blast helmet.
RPB C40 Climate Control Device
The C40 can cool incoming air by up to 52°F (29°C) or heat it by up to 33°F (18°C) so operators can choose the perfect temperature for the conditions they’re working in and then adjust it if they get too hot or too cold by simply sliding a lever on
RPB Cool Air Tube Assembly NV4000-1
The Cool Air Tube Assembly cools compressed breathing air coming into respirators by as much as 32°F (18°C) and features an airflow regulator which the operator can adjust to suit their requirements.
RPB Hot Air Tube Assembly
The Hot Air Tube Assembly from RPB helps to keep workers warm in cold climates, increasing comfort and productivity. The Hot Air Tube Assembly increases the temperature of compressed breathing air by up to 30 degrees Fahrenheit (17C).
RPB Nova 2000 Blast Helmet Breathing Tube
The RPB NOVA Blast Helmet Breathing Tube provides a constant flow of breathable air to ensure worker comfort and safety. Designed to work perfectly with the RPB NOVA 2000 Blast Helmet.
RPB Nova 2000 Blast Helmet Inners (Pack of 10)
Pack of 10 inner lenses for the RPB NOVA 2000 Blast Helmet. Ensure your NOVA helmet stays in tip top condition with these replacement inner lenses.
RPB Nova 2000 Blast Helmet Tear Offs (Pack of 50)
The ″FIT AND SAVE″ system features individually folded tabs so the user can never grab more than one tab at a time so no lenses are wasted. These lenses are designed to fit the NOVA 200 Blast Helmet and come in packs of 50.
Nova 2000 Clear Outer Visors (Pack of 50)
Pack of 50 clear outer visors to suit the NOVA 2000 Blast Helmet from RPB. These visors will ensure that operators always have a clear view increasing safety and productivity.
RPB Nova 2000 Latch Kit
This replacement latch kit ensures that your RPB Nova 2000 helmet continues to provide maximum protection and comfort.
Nova 2000 Visor Frame
It is important to replace your visor frame if it becomes damaged as it provides vital protection. This replacement visor frame for the NOVA 2000 Blast Helmet ensures that your helmet continues to deliver the high standard of safety you expect.
Nova 2000 Visor Window Gasket
This replacement visor window gasket ensures that your NOVA 2000 helmet continues to provide maximum protection and comfort.
RPB NOVA 2000 Blast Helmet
The RPB NOVA 2000 Advanced Abrasive Blasting Helmet has been designed specifically for blasting by blasting experts and has been given worldwide safety approval including NIOSH, CE and AS/NZS.
RPB NOVA 3 Blast Helmet
This Nova blast helmet offers superior comfort and functionality combined with the very latest in protection technology.
RPB Astro Blasting Helmet
The Astro from RPB is one of the lightest and most economic abrasive blasting helmets available on the market.
Pangborn Breathing Airline
1/4″ quality breathing air hose made from reinforced polyester with high quality, clear PVC liner. Fitted with 1/4″ brass swivel couplings for ease. Tested for working pressures of up to 250 psi, to BS 6066. Fits to both RPB Radex breathing units.
NOTE: RPB Radex Breathing Unit Available Separately
Pangborn Breathing Cartridge Model 41
Cartridges are available for many breathing filters on the market. This particular cartridge is suited to the Model 41 breathing filter. If you require a cartridge for an alternative breathing filter please contact our sales/technical departments who will be happy to find it for you.
Pangborn CPF Filter Cartridge
Pangborn offer cartridges for many breathing filters on the market. This filter is suited to CPF breathing filters. If you require an alternative cartridge please contact our sales/technical department who will be happy to find it for you.
Pangborn Two Man Breathing Filter
Pangborn Model 41 air breathing filter with pressure regulator. A seven stage filter which removes all oil, mist and vapour, down to 0.5 microns.
NOTE: Breathing line NOT included.
CPF 3547 Replacement Breathing Cartridge
Replacement filter cartridge for free standing breathe air units (Part no. CPF 03547). This breathing cartridge suits several different brands including the Clemco B.A. unit and is designed to remove odours, particles, oil and vapour or mist.
RPB GX4 Gas Monitor
Readings are displayed in real time on the illuminated display and the unit also has a built in WIFI hotspot so it can be accessed via a laptop, tablet, phone or network. The unit keeps detailed records, logging data every five seconds which is useful for inspectors.
RPB Radex Breathing Unit
The Radex Airline Filter from RPB can be customized to suit a number of breathing requirements including Grade D, As1715, EN12021, and Iso8573.1 Class 1, 2 3.
NOTE: Pangborn Breathing Airline Available Separately.
M12 Tile Bolt c/w Nut & Washer Bolt0233ST
M12 Tile Bolt c/w Nut & Washers - Metric 12mm tile bolt.
Supplied and available from Pangborn UK.
Feed Chute Seal: XSES9
Feed Chute Seal is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The Pangborn SES Feed Chute to Feed Wheel
Reversible Super Wheel: XSESR1T-L
Reversible Super Wheel is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is for the Pangborn SES Wheel Assembly
T/L Bush to Suit SESR1T/L Wheel (38, 42 or 48mm) XB2525/38/42/48
The T/L Bush is to Suit SESR1T/L Wheel is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part fits into the Reversible Super Wheel for Pangborn SES Wheel Assembly
Reversible Wheel Dispenser XSESR3-C
The Reversible Wheel Dispenser is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is a Reversible Wheel Dispenser, for the Universal Wheel Assembly Unit - Pangborn SES
M16 Dispenser Bolt c/w Washer Bolt0375
M16 Dispenser Bolt c/w Washer –Metric 16mm Dispenser Bolt.
Supplied and available from Pangborn UK.
M12 Dispenser Bolt c/w Washer Bolt0350
M12 Dispenser Bolt c/w Washer –Metric 12mm Dispenser Bolt.
Supplied and available from Pangborn UK.
Rubber Hub Seal: XSES8C
Rubber Hub Seal is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: Suitable for; SES R1 Taper Lock Wheel
Clamp Ring For SES8CC Seal XSES8CB
Clamp Ring For SES8CC Seal is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: Suitable for; SES8CC Seal
M16 Motor Mounting Studs c/w Nut & Washers ENGSTUD16
M16 Motor Mounting Studs c/w Nut & Washers –Metric 16 mm Mounting Studs.
Supplied and available from Pangborn UK.
M12 Hood Mounting Studs c/w Nut & Washers ENGSTUD12
M12 Hood Mounting Studs c/w Nut & Washers –Metric 12 mm Mounting Studs for motor.
Supplied and available from Pangborn UK.
Pilot Bored Wheel (bored to suit motor shaft) – XSESR1PB
The Pilot Bored Wheel is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: Suitable for; foot mounted Pangborn SES Wheel Unit
Housing Retention Plate – XSES4A
The Housing Retention Plate, manufactured and supplied by Pangborn UK is specifically designed to suit foot mounted Pangborn SES wheel unit and flange mounted unit.
This is an Pangborn UK OEM Spare Part, only available from Pangborn UK.
Cast Hub Seal Plate – XSES8A
The Cast Hub Seal Plate is manufactured and supplied by Pangborn UK. Designed to suit foot mounted Pangborn SES wheel unit, specifically designed for this type of wheel unit.
This is an Pangborn UK OEM Spare Part, only available from Pangborn UK.
Hub Seal Felt/Rubber (Small Bore) – XSES8C1
Hub Seal Felt/Rubber (Small Bore) is manufactured and supplied by Pangborn UK. Designed to suit foot mounted Pangborn SES wheel unit, specifically designed for this type of wheel unit.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Hood Lid Curved Wear Tile – XMF5
The Hood Lid Curved Wear Tile - Pangborn SES Hood Lid Curved Wear Tile is manufactured and supplied by Pangborn UK. This hood has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Hood End Wear Plate – XMF6
Hood End Wear Plate - Pangborn SES End Wear Plate - is manufactured and supplied by Pangborn UK. This plate has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Upper Hood Side Wear Plate – XMF7
Upper Hood Side Wear Plate - Pangborn SES Upper Hood Side Wear Plate is manufactured and supplied by Pangborn UK. This plate has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Lower Hood Side Wear Plate – XMF9A L/H
The Lower Hood Side Wear Plate - Pangborn SES Lower Hood Side Wear Plate is manufactured and supplied by Pangborn UK. This hood has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
NOTE: This Part is Designed for
Lower Hood Side Wear Plate – XMF9A R/H
The Lower Hood Side Wear Plate – Pangborn SES Lower Hood Side Wear Plate is manufactured and supplied by Pangborn UK. This hood has been specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
NOTE: This Part is Designed for
Feed Chute – XSES3
The Feed Chute is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
Suitable for; suite flanged, curved and foot mounted Pangborn SES wheel units.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
Quad Valve Assembly – XSES4ASS
The Quad Valve Assembly is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
NOTE: This part is suitable for; Pangborn SES Wheel Units.
Feed Cast Hopper – XSES5
The Feed Cast Hopper is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
NOTE: This part is suitable for; Pangborn SES Wheel Units.
Hub Seal Felt / Rubber (Large Bore) – XSES8C2
The Hub Seal Felt / Rubber (Large Bore) is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
This is an original Pangborn UK OEM Spare Part, only available from Pangborn UK.
R-LOC Top Liner – A1936
R-LOC Top Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Front Side Liner – A1939
R-LOC Front Side Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Rear Side Liner – A1940-B
R-LOC Rear Side Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC End Liner – A1937
R-LOC End Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Vanes (Set of 8) – 6000025-8
R-LOC Vanes are an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Impellor – 6010000
The R-LOC Impellor is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Vane Spring – M0651
The R-LOC Vane Spring is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Rubber Lid Liner – M2046
The R-LOC Rubber Lid Liner is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-Loc Felt Seal – S040146
The R-Loc Felt Seal is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Taper Lock Bush 42mm – S080114-2
The R-LOC Taper Lock Bush is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Case Adaptor – A0301
The R-LOC Case Adaptor is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Feed Spout – A-0303
The R-LOC Feed Spout is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Spout Seal – C60152
The R-LOC Spout Seal is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC ‘O’ Ring – C60153
The R-LOC 'O' Ring is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Outer Runnerhead – H010109
The R-LOC Outer Runnerhead is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
R-LOC Inner Case Adaptor – P000890
The R-LOC Inner Case Adaptor is an original R-LOC spare part, supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; Pangborn Rimlock Wheel Assembly Unit
Deflector – 6-750027
The Deflector is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Vanes – 6-900012
Vanes are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Runnerhead Outer – 26-750025
The Runnerhead Outer is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Runnerhead Inner – 36-620465
The Runnerhead Inner is an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Vanes 6-900011
Vanes are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
Vane Spring – RAP-4
Vane Spring's are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
‘O’ Ring – S-900658-2
'O' Ring's are an original Pangborn SES spare part, manufactured and supplied by Pangborn UK. Specifically designed for Automatic Shot Blast Machines.
NOTE: This part is suitable for; The 180 3rk Wheel Unit
S-70 0.3mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-110 0.4mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-170 0.6mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-280 0.8mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-230 0.7mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-330 1.0mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-390 1.2mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-460 1.4mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-550 1.7mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-660 2.0mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
S-780 2.4mm Shot blasting Abrasive Shot
Pangborn Rotoblast® Steel Shot is the best abrasive for most wheel blast applications. Its durability and resistance to impact fatigue provide maximum cleaning efficiency at the most economical cost.
Meets SAE, SFSA and MIL specifications
NOTE: Sold in 25kg bag. Minimum order 1 Tonne. POA.
G-10 2.4mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-12 2.0mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-14 1.7mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-16 1.4mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-18 1.2mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-25 1.0mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-40 0.7mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-50 0.5mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-80 0.3mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
G-120 0.2mm Shot blasting Abrasive Grit
Cast Steel angular grit is produced by crushing specifically heat treated shot pellets. It's behaviour characteristics in service are dependent upon the hardness selection of GC, GB, GAA or GA grit.
Meets SAE, SFSA and MIL specifications.
NOTE: sold in 25kg bags. Minimum order 1 Tonne. POA.
